大型除湿干燥机系统:
DDS大型除湿干燥机系统应用於塑胶使用大且露点要求低的场合。本公司制造的大型除湿干燥系统用於处理PET原料时最高可达800kg/h。该系统主要包含每小时干燥风量可以达到4000m3的蜂巢转轮式除湿机及容料量高达8.000L（於装载PET时的有效重量为6.400kg）的保温式干燥料桶，经由转轮除湿机处理过后的干燥原料最终含水率可以达到0.004%以下。
Large dehumidifying drying system
When you need to use large quantity of plastic and lower dew-point, you should choose DDS series large dehumidifying drying systems.
DDS series' capacity can reach 8000kg/h. This system includes honeycomb rotor dehumidi er(8000m3/h) and insulation hopper
(10000L or 8000kg PET). After treatment, the highest rate of dry raw material can reach the nal moisture content below 0.004%.
